This 10 mm marine fuel hose is designed for safe fuel transfer on boats, yachts and small commercial vessels. It is suitable for inboard marine engines, fuel tanks, fuel filters, water separators and other onboard fuel line installations. The hose is fire-resistant and certified according to ISO 7840 A1 and SAE J1527 USCG A1 , making it suitable for marine fuel systems where safety and compliance are important. Sold per meter - supplied as one uncut length This fuel hose is sold per meter . Select the number of meters you need as the product quantity. Examples: Quantity 1 = 1 meter Quantity 5 = one 5 meter hose length Quantity 10 = one 10 meter hose length Quantity 40 = one full 40 meter roll The hose is supplied as one continuous uncut length up to a maximum of 40 meters . For example, if you order 10 meters, you receive one 10 meter piece , not 2 pieces of 5 meters. Technical specifications Inner diameter: 10 mm Outer diameter: 18mm Suitable for: 8 mm hose tails / nipples Working pressure: 14 bar Burst pressure: 30 bar Bending radius: 45 mm Temperature range: -20°C to +80°C Certification: ISO 7840:2021 A1 Certification: SAE J1527 USCG A1 Approvals: RINA / Lloyd’s Register Fuel compatibility: diesel, biodiesel and unleaded fuel Maximum continuous length: 40 meters Construction Inner tube: smooth black NBR rubber, resistant to petroleum-based fuels Reinforcement: high-strength synthetic textile reinforcement Outer cover: CR/NBR rubber, resistant to abrasion, heat, fuel, ozone and marine conditions Surface: smooth fabric-finished outer layer for easy installation Safety: fire-resistant and self-extinguishing construction Suitable for This 8mm marine fuel hose can be used for: Marine diesel engines Inboard fuel systems Boat fuel tank connections Fuel filter connections Water separator connections Diesel and biodiesel fuel lines Pleasure boats, yachts and small commercial vessels Important fitment note This hose has an 10 mm inner diameter and is suitable for 10 mm hose tails, nipples and fuel fittings . Always check the diameter of your old hose or fitting before ordering. For a safe installation, use suitable marine-grade hose clamps and check all fuel connections after installation.
Know more
