By MarinePartSystem
Quick answer
Keeping the gearbox oil in your inboard engine fresh is essential for smooth running and for avoiding major repairs. This guide takes you through the process step by step.
In this guide
- 📋 Step-by-step process
- 1. Warm the engine
- 2. Find the fill and drain points
- 3. Remove the old oil
- 4. Check for contamination
- 5. Replace the oil filter (if fitted)
- 6. Fill with new oil
- 7. Run the engine and check the level
- 8. Check for leaks
- 9. Dispose of the old oil
- 🌊 Popular marine inboard gearboxes
- 💡 Final tips
- 📋 Oil types by gearbox
- Kanzaki (Yanmar)
- Bukh
- Hurth
- Not sure which part fits?

Keeping the gearbox oil in your inboard engine fresh is essential for smooth running and for avoiding major repairs. This guide takes you through the process step by step.
🛠️ Tools and materials you need- Replacement transmission oil (check your manual)
- Oil extraction pump (manual or electric)
- Funnel
- Container for the old oil
- Clean rags
- Spanner (if you need one for the drain plug)
- New gearbox oil filter (if fitted)
📋 Step-by-step process
1. Warm the engine
Run the engine for a few minutes to warm the oil (optional, but it helps with extraction).
2. Find the fill and drain points
Check your manual for the dipstick, filler opening and drain plug. Some gearboxes are emptied with an extraction pump through the dipstick tube.
3. Remove the old oil
- If there is a drain plug, put a container underneath and remove the plug to drain.
- If there is no plug, use an extraction pump through the dipstick tube.
4. Check for contamination
Look for metal shavings, water or a burnt smell in the old oil. That may need a closer check.
5. Replace the oil filter (if fitted)
Some gearboxes have a filter – see your manual for how to replace it.
6. Fill with new oil
- Use a funnel to add the correct oil type and quantity.
- Do not overfill – check the level on the dipstick.
- Buy your oil here
7. Run the engine and check the level
Let the engine idle for a few minutes, then top up if needed.
8. Check for leaks
Check the drain plug and filler cap for any leaks.
9. Dispose of the old oil
Take the used oil to a recycling centre so it can be disposed of properly.
🌊 Popular marine inboard gearboxes
These are common gearboxes:
- Hurth (ZF)
- Volvo Penta IPS
- Twin Disc
- PRM
- Technodrive (TMC)
- Borg Warner Velvet Drive
- Yanmar
- Masson Marine
💡 Final tips
- Check your manual for the specific instructions and oil type.
- Inspect the oil regularly for discolouration or dirt.
- If the gears slip or make noise, have the gearbox checked.
Follow these steps to keep your gearbox running well for years.
📋 Oil types by gearbox
Kanzaki (Yanmar)
- KBW10E ATF oil 0.7 litres
- KBW20 ATF oil 1.2 litres
- KBW20-1 ATF oil 1.2 litres
- KBW21 ATF oil 1.2 litres
- KM2P same oil as the engine 0.3 litres
- KM3A-1 same oil as the engine 0.45 litres
- KM3P same oil as the engine 0.35 litres
- KM3P4 same oil as the engine 0.35 litres
- KM35P same oil as the engine
- KM35A same oil as the engine
- KM35A2 same oil as the engine
- KM3V SAE 30 engine oil 0.8 litres
- KM4A SAE 30 engine oil or the same oil as the engine 1.3 litres
- KM4A1 SAE 30 engine oil or the same oil as the engine 1.3 litres
- ZF 30 M ATF
- KM5A SAE 30HD oil 2.1 litres
- KMH4A hydraulic oil 2.0 litres
- KMH6A hydraulic oil 4.0 litres
- KMH6A1 hydraulic oil 4.0 litres
- SD20 SAE 80W90 gear oil (except GM1 engine) 2.2 litres
- SD31 SAE 80W90 gear oil (except GM1 engine) 2.2 litres
- SD40 Quicksilver high-performance gear lubricant 1.8+ litres
- SD40-T Quicksilver high-performance gear lubricant 2.1+ litres
- YX-70 hydraulic oil 5.0 litres
Bukh
- Bukh Saildrive DV10LSME hypoid gear oil SAE 90 or SAE 80W90 0.4 litres
- Bukh Saildrive DV10 hypoid gear oil SAE 90 or SAE 15W40 3.3 litres
- Bukh Saildrive DV20 hypoid gear oil SAE 90 or SAE 15W40 3.3 litres
- Bukh Saildrive DV24 hypoid gear oil SAE 90 or SAE 15W40 3.3 litres
- Bukh Saildrive DV36 hypoid gear oil SAE 90 or SAE 15W40 3.3 litres
- Bukh Saildrive DV48 hypoid gear oil SAE 90 or SAE 15W40 3.3 litres
Hurth
- Hurth HBW 5 ATF oil 0.35 litres
- Hurth HBW 10 ATF oil 0.55 litres
- Hurth HBW 20 ATF oil 0.75 litres
- Hurth HBW 35 ATF oil 0.30 litres
- Hurth HBW 40 ATF oil 0.30 litres
- Hurth HBW 50 ATF oil 0.30 litres
- Hurth HBW 100 ATF oil 0.35 litres
- Hurth HBW 125 ATF oil 0.55 litres
- Hurth HBW 150A ATF oil 0.5 litres
- Hurth HBW 150V ATF oil 1.0 litres
- Hurth HBW 250 ATF oil 0.75 litres
- Hurth HSW ATF oil 3.5 litres
Always check your manual for the correct oil type and quantity.
Ready to change your transmission oil? Start with our products.
Buy transmission oilView all oils
Not sure which part fits?
Send us your engine model or part number and we will check it for you.
Shop related parts

