Marine Throttle and Shift Control Cables
Engine control cables connect your boat's remote control lever to the engine or gearbox, allowing you to control engine speed and select forward, neutral or reverse. These mechanical push-pull cables are commonly used in boats with inboard engines, sterndrives and compatible outboard control systems.
At Marinepartsystem, you'll find engine control cables in different lengths, including the widely used Morse 33C and 3300C type cables.
Morse 33C and 3300C Control Cables
The 33C / 3300C cable type is one of the most common mechanical control cable systems used in boats. These cables can operate as either a throttle cable or a gear shift cable, provided the control lever and engine connections are compatible.
Standard 33C / 3300C type cables typically feature 10-32 UNF threaded ends and are available in a range of lengths to suit different installations.
How to Choose the Correct Control Cable
When replacing a boat control cable, check the following:
- Cable type: Identify whether your existing cable is a 33C, 3300C or another type.
- Cable length: Check the marking on your existing cable or measure the required routing distance.
- Connection type: Verify the fittings at both the control lever and engine.
- Cable travel: Ensure the cable provides sufficient movement for throttle or gear shift operation.
A cable that is too short, incorrectly routed or incompatible with the control mechanism can cause stiff operation or incomplete gear engagement.
Replace Worn or Stiff Control Cables
Over time, marine throttle and shift cables can become stiff due to wear, corrosion or damage. Replacing a worn cable can help restore smooth throttle response and precise gear selection.
Browse our range of marine engine control cables and select the correct cable type and length for your installation. Not sure which cable you need? Contact Marinepartsystem with the markings from your existing cable or the details of your control system.