Clear food-grade PVC hose with a steel wire spiral, sold per metre in inside diameters from 12 to 76 mm. The wire keeps the hose round under suction, so it suits the raw water intake from seacock to strainer, fresh water lines and bilge suction. It is rated from -10 to +60 °C. All hose is new.
A suction line needs a hose that does not collapse. The steel wire spiral in this PVC hose takes care of that, and because the hose is clear you can see dirt or air in the line. For example GS35005 is 25 mm inside and 33 mm outside, with a working pressure of 5 bar at 23 °C. The price is per metre; set the number of metres in the quantity field.
This hose is for cold water up to 60 °C. It is not for the wet exhaust: that needs exhaust hose. For diesel or petrol use fuel hose. The strainer that goes in the raw water line is in sea strainers.
On the cold raw water side, between seacock, strainer and pump, yes. Not after the engine, where the water is hot, and not for the exhaust.
Go by the inside diameter, the same as the hose tail it goes on. Use a hose clamp of the right size; below the waterline, two clamps per connection is good practice.
The hose is food-grade PVC. For a drinking water system, check what your tank and pump maker advise.