An engine anode worn down to a stub no longer protects the cooling system, and a saildrive anode that is half gone should come off at the next haul-out. Here are the zinc pencil anodes for Yanmar engines and the anodes and kits for the SD20 to SD60 saildrives. Engine anodes come as anode only or with a plug, so check which one you need.
The zinc pencil anodes screw into the cooling system. Genuine 27210-200200 is listed for the 1GM and 1GM10 and the 6LY3. A second type is for the 2GM, 2GM20, 3GM, 3GM30, 3HM and the YS engines. For the 6LY2, 6LYA and 8LV there is another one, as anode only, with a loose nut or with a plug. The kit for the 6LP, 6LY and 4LH holds five anode assemblies with plugs.
Anode only means you reuse your old plug. If that plug is corroded or the thread is damaged, take the version with plug.
For the SD20, SD30, SD31, SD40 and SD50 the one-piece anode is 196440-02660, in zinc or aluminium. Complete kits for the SD20 to SD60 come in zinc, aluminium and magnesium. There is also the genuine split anode kit and the stainless adapter plate for split rings.
Choose the metal by the water: zinc or aluminium in salt and brackish water, magnesium in fresh water. One of the two magnesium kits comes without brackets; the product page says which.
Replace an anode when about half of it is gone. Engine anodes are easy to forget, so check them at every service. Take the old one out and compare it with the photo and the number on the product page. Anodes for other brands are under engine anodes, and the other saildrive parts under Yanmar Saildrive Service Parts.
Zinc or aluminium in salt and brackish water. Magnesium only in fresh water. Don't mix metals on one drive.
Only if your plug is worn or the thread is bad. Otherwise the anode alone is enough and you reuse the plug.
Check it at every service and at least once a season. Replace it when about half is gone.
Showing 1–12 of 23 results

New
2 in stock | Backorder available