Yanmar Engine Mounts for GM, HM and YM engines, and for some saildrive installations. You'll find Ellebogen mounts such as 129470-08350 and 128170-08350 for the 1GM and 1GM10, plus complete kits for shaft and saildrive layouts. Compare the number on the old mount, and the engine type, with the listing. Unsure? Send us a photo and the type plate details.
These Yanmar engine mounts are the flexible feet that sit between the engine and the beds. The range is mainly Ellebogen mounts and kits, listed to Yanmar numbers and to engine families such as 1GM, 2GM, 3GM, 3HM, 2YM and 3YM. Shaft-drive kits and saildrive kits are not the same, because the height and the stiffness can differ.
Start with the engine type and the number on the old mount. Mount 128170-08350 is listed for the Yanmar 1GM and 1GM10, and 129470-08350 is the Ellebogen 200 mount in this category. Compare the height, the stud size and the rubber stiffness with the old part, not only the overall look. For a kit, check whether it is listed for a shaft installation or a saildrive.
Take the number off the old mount if it is still readable, and note the engine designation from the type plate, plus whether you have a saildrive. Then compare both with the listing. No number left? Send us a clear photo of the mount and the engine beds. A wider mount range is under Engine Mounts.
Mount 128170-08350 in this category is listed for the 1GM and 1GM10, and there is also a 1GM kit. Compare the height and the stud with your old mounts, because later beds can differ.
Only if the listing says so. Saildrive kits are made for that installation and can have a different height or stiffness. Use the kit that names your drive type.
Replace a mount when the rubber is cracked, oil-soaked or collapsed, or when the engine sits visibly lower on one side. Always renew mounts as a set, so the engine stays level.